Difference between revisions of "ADS-B Set Up"
Jump to navigation
Jump to search
(Created page with "==Setting Up ADS-B Decoder w/ Virtual Radar== <br> You will need: * (x1) Software Defined Radio with a resonant antenna * [http://www.satsignal.eu/software/dump1090-win.1.10.3010.14.zip Dump 1090 Software] * [https://www.virtualradarserver.co.uk/Download.aspx Virtual Radar Server] <br> - Please note you MUST put the drivers on both "Bulk Interface 0" and "Bulk Interface 1" <br> - One interface is for HF Bands, and One is for VHF+ # Update your SDR with the correct WinUS...") |
m (Protected "ADS-B Set Up" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))) |
(No difference)
| |
Revision as of 19:39, 29 March 2022
Setting Up ADS-B Decoder w/ Virtual Radar
You will need:
- (x1) Software Defined Radio with a resonant antenna
- Dump 1090 Software
- Virtual Radar Server
- Please note you MUST put the drivers on both "Bulk Interface 0" and "Bulk Interface 1"
- One interface is for HF Bands, and One is for VHF+
- Update your SDR with the correct WinUSB Driver using the ZaDig Tool
- Install the Virtual Radar Software
- Boot Virtual Radar and go to Tools > Options > Receiver > Wizard (At Top Right)
- Wizard: A Software Defined Radio > Dump 1090 > yes > Finish
- Run the Dump1090.exe
- Paste into Browser: http://127.0.0.1/VirtualRadar
- Configure Settings to your liking and Enjoy!