Difference between revisions of "Main Page"

Revision as of 09:42, 29 March 2022

Welcome to the W2ORT Wiki Page!

Setting Up ADS-B Decoder w/ Virtual Radar
You will need:

- Please note you MUST put the drivers on both "Bulk Interface 0" and "Bulk Interface 1"
- One interface is for HF Bands, and One is for VHF+

@@ Line 3: / Line 3: @@
+<strong>Setting Up ADS-B Decoder w/ Virtual Radar</strong>
+<br>
+You will need:
+* (x1) Software Defined Radio
+* [http://www.satsignal.eu/software/dump1090-win.1.10.3010.14.zip Dump 1090 Software]
+* [https://www.virtualradarserver.co.uk/Download.aspx Virtual Radar Server]
+# Update your SDR with the correct WinUSB Driver using the ZaDig Tool
+<br>
+- Please note you MUST put the drivers on both "Bulk Interface 0" and "Bulk Interface 1"
+<br>
+- One interface is for HF Bands, and One is for VHF+
+# Install the Virtual Radar Software
+# Boot Virtual Radar and go to Tools > Options > Receiver > Wizard (At Top Right)
+# Wizard: A Software Defined Radio > Dump 1090 > yes > Finish
+# Run the Dump1090.exe
+# Paste into Browser: http://127.0.0.1/VirtualRadar
+# Configure Settings to your liking and Enjoy!
 == Useful Links ==
 *[https://www.akardam.net/r/m/tools/fdecode.pl Astro Flashcode Decoder]