ADS-B Set Up

From W2ORT
Revision as of 19:27, 10 April 2022 by W2ORT (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Setting Up ADS-B Decoder w/ Virtual Radar


You will need:


- Please note you MUST put the drivers on both "Bulk Interface 0" and "Bulk Interface 1"
- One interface is for HF Bands, and One is for VHF+

  1. Update your SDR with the correct WinUSB Driver using the ZaDig Tool
  2. Install the Virtual Radar Software
  3. Boot Virtual Radar and go to Tools > Options > Receiver > Wizard (At Top Right)
  4. Wizard: A Software Defined Radio > Dump 1090 > yes > Finish
  5. Run the Dump1090.exe
  6. Paste into Browser: http://127.0.0.1/VirtualRadar
  7. Configure Settings to your liking and Enjoy!


Installation Video