Main Page

General Information

Welcome to the W2ORT Wiki Page!

Setting Up ADS-B Decoder w/ Virtual Radar
You will need:

• (x1) Software Defined Radio
• Dump 1090 Software
• Virtual Radar Server

- Please note you MUST put the drivers on both "Bulk Interface 0" and "Bulk Interface 1"
- One interface is for HF Bands, and One is for VHF+

1. Update your SDR with the correct WinUSB Driver using the ZaDig Tool
2. Install the Virtual Radar Software
3. Boot Virtual Radar and go to Tools > Options > Receiver > Wizard (At Top Right)
4. Wizard: A Software Defined Radio > Dump 1090 > yes > Finish
5. Run the Dump1090.exe
6. Paste into Browser: http://127.0.0.1/VirtualRadar
7. Configure Settings to your liking and Enjoy!

Useful Links

• Astro Flashcode Decoder