ADS-B Set Up

From W2ORT
Revision as of 19:39, 29 March 2022 by W2ORT (talk | contribs) (Created page with "==Setting Up ADS-B Decoder w/ Virtual Radar== <br> You will need: * (x1) Software Defined Radio with a resonant antenna * [http://www.satsignal.eu/software/dump1090-win.1.10.3010.14.zip Dump 1090 Software] * [https://www.virtualradarserver.co.uk/Download.aspx Virtual Radar Server] <br> - Please note you MUST put the drivers on both "Bulk Interface 0" and "Bulk Interface 1" <br> - One interface is for HF Bands, and One is for VHF+ # Update your SDR with the correct WinUS...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Setting Up ADS-B Decoder w/ Virtual Radar


You will need:


- Please note you MUST put the drivers on both "Bulk Interface 0" and "Bulk Interface 1"
- One interface is for HF Bands, and One is for VHF+

  1. Update your SDR with the correct WinUSB Driver using the ZaDig Tool
  2. Install the Virtual Radar Software
  3. Boot Virtual Radar and go to Tools > Options > Receiver > Wizard (At Top Right)
  4. Wizard: A Software Defined Radio > Dump 1090 > yes > Finish
  5. Run the Dump1090.exe
  6. Paste into Browser: http://127.0.0.1/VirtualRadar
  7. Configure Settings to your liking and Enjoy!
Retrieved from "https://wiki.w2ort.com:443/index.php?title=ADS-B_Set_Up&oldid=24"